A high-quality nail drill bits can do more than just scrape nail products off your nails, but can make your life easier with the job and save you some precious time while working for clients.
Yaqin nail drills come in a variety of materials, shapes, sizes, and particle sizes, each with a different use and purpose. In this article, we will explain the different materials of Yaqin nail drills. These four materials are the most common: carbide nail drills, ceramic nail drills, diamond nail drills, and mandrels/sanding bands.
Carbide nail drills are made of carbide metal (20 times stronger than steel). Carbide drills are very durable. Carbide drills have flute-like cuts. These cuts allow the carbide drill to scrape off the reinforcement product, rather than scratching it like a diamond drill. The grid scale is determined by the grooves on the drill. Dip and large grooves indicate coarse sand, and shallower grooves generally indicate finer bits. Carbide bits are a great tool for advanced users and are great for removing acrylics. They should not be used on natural nails as this will damage the nail. Of course, carbide drills can be cleaned.
The advantage of ceramic nail drills is that due to the nature of ceramic drills, they do not heat up in the same way as other drills. They are hard, wear-resistant, resistant to oxidation and are also durable. Ceramic bits also have flute-like cuts, which help the bit scrape product off the nail surface. Ceramic drill bits can also be cleaned and sterilized.
Diamond nail drill bits are the hardest bits available, either natural or synthetic. They remove built-up product by scraping, but diamond bits generate more dust and friction, and therefore more heat, than the aforementioned alloy and ceramic bits. It will not rust after disinfection. Most cuticle drills are made of diamond.
The Mandrel bit is typically made of metal or rubber. You can slip the mandrel top into the sanding band and you good to go. Sanding bands cannot be disinfected. That is one of the reasons why sanding bands are one-use-only paper bits, so you have to change a sanding band after every client. The sanding bands are commonly used for surface work, removing gels, and pedicures. They come in various grits: coarse, medium and fine.
Yaqin Nail Drill Bit Factory 13 Years of Production Experience Professional Manufacturer of Nail Drills and Nail Drill Bits, Private Packaging, Best-selling in 50+ Countries, Many Product Styles and Colors, Support ODM/OEM, Can Be Purchased Centrally.
Post time: Jun-23-2022