How to Maintain Yaqin Nail Drill Machine and Nail Drill Bits

Maintaining Your Nail Drill Machine and Nail Drill Bits is Just As Important As Maintaining Beautiful Nails. Whether You’re a Manicurist or Beginner, Using Them at Home, or in a Nail Salon, It’s Imperative That You Know How to Properly Maintain Them to Help You Ensure Optimum Performance and Efficiency. Repair of Nail Drill Machines and Maintenance of Nail Drills Bits Are Not Difficult. We’ll Share Some Tips and Tricks with You to Make Maintaining These Products Easier for You.

Professional Nail Drill machine

Nail Drill Machine Care Tips

Do Not Use Lubricants on Your Nail Drill Machine Without Needing To. Usually, Nail Drill Machines Are Manufactured with Self-lubricating Bearings. Excess Oil Can Create Excess Heat, Which Can Wear Down the Machine and Cause Overheating.

Never Immerse the Manicure Head in Disinfectant. Failure to Do So Will Damage the Internal Motor, Resulting in Its Damage or Malfunction.

Don’t Turn Your Nail Drill Machine in the Other Direction While It’s Still Going. Be Sure to Close It Before Changing Directions to Prevent Damage.

After the Perfect Manicure, Use a Muslin, Microfiber, and Soft Brush to Remove Dust and Debris from the Small Crevices of Your Equipment. Make Sure Your Nail Drill Machine is Not Clogged when Wiping with a Damp Cloth.

Hold the Device Carefully and Firmly Without Bending the Handle. Track the Sitting Position of the Manicure Machine Rope.

When You’re Done, Be Sure to Remove the Nail Drill Bits from the Nail Drill Machine.

Be Careful to Make Sure the Nail Bit is Installed Correctly So It Doesn’t Come Loose.

Routine Electrician Inspection of Nail Drill Machines
One of the Most Important Parts of Maintaining a Nail Drill Machine is Having It Inspected Annually by a Professional Electrician. Although Your Nail Drill Machine Looks Good on the Outside, the Electrical Components Inside Can Become Loose, Noisy, and Dirty. Never Wait Until a Problem Occurs Before Handing the Nail Drill Machine over to an Electrician for Inspection.

Routine Manicure Machine Inspections Include Taking the Phone out and Cleaning It Inside. Dust and Fingernail Chips Build Up in the Machine, Which Can Cause It to Malfunction and Make Strange Noises. if Any Parts Need to Be Replaced, We Will Notify You and Provide a Repair Quote.

Carbide Nail Drill Bits 5in1

How to Clean Nail Drill Bits
Remember to Clean the Nail Drill Bits After Each Use. Nail Chips and Dust Can Easily Accumulate in the Cracks of the Nail Drill Bits. if It Accumulates Too Much, It May Affect Performance. the Best Way to Clean Your Nail Bits is with a Muslin Cloth or a Small Soft-bristle Brush. You Can Also Use Canned Air to Blow Away These Small Particles After Each Use.

Caring for Nail Drills Bits
Don’t Forget to Take Care of Your Nail Drills Bits! After Each Use, Dusting or Cleaning with a Fine Cloth or Brush is Recommended. Disinfection Procedures Must Be Followed to Prevent the Spread of Germs from One Customer to Another. to Do This, the Nail Bit Must Be Scrubbed with Soapy Water or Soaked in Acetone. After That, Use a Metal Sanitizer, Making Sure to Follow the Instructions Provided by the Nail Drill Bits Manufacturer. Air Dry the Nail Bit Thoroughly and Store It in a Covered, Dry Place.

 Ya-qin Nail Drill Factory 13 Years of Production Experience Nail Drill, Nail Drill Professional Manufacturers, Private Packaging, Best-selling 50+ Countries, Product Styles and Colors, Support ODM/OEM, Can Be Centralized Procurement


Post time: Apr-28-2022

Send your message to us:

Write your message here and send it to us